InCo

«Management company Prommashtechnologia, Ltd» - engineering machine-building company. 

The developer and producer of modern high-tech industrial equipment.       

DFM DISK VACUUM FILTERS

Disk vacuum filters are intended for division of neutral and alkaline suspensions with a temperature from 2 to 60 °C (carbonaceous execution). Can be applied in large-capacity productions at concentrating factories of ore mining, coal, metallurgical industry and in other branches.олвиаоыв.jpg


ADVANTAGES OF DFM FILTERS

- High efficiency;

- The developed filtering surface;

- Low humidity of a deposit;

- Convenience and simplicity of service;

Сектора.jpg 

MAIN COMPONENTS

The cell shaft represents a shaft - the bearing design on which collector systems are mounted. Sections and a configuration of mouths of sektorovdruboprovod of collector system and distributive golovokpodobranytak.chtoba to minimize hydroaerodynamic resistance and turbulent streams in them. Filtrate optimalnyeusloviyadlyanaboraosadkaiudalene from слоякекаиизполостейфильтра.т.е.создаютсяусловиядля uvelicheniyaproizvoditelnost of the filter and decrease in humidity of a deposit are a consequence.

Heads distributive depending on specific conditions, can be with separate vacuum in zones of a set and a sushkiosadka.

Korytosvarny design plum, support for yacheykovogovala.nozhiikarmana bearings for removal of a kek has the union for giving and a modulation of suspension, system.

The mixer of rotor type well proved on the tonkoizmelchennykh pulps of high density. The mixer has the privodspostoyanny speed of rotation

Privodvala oborotovvat obespechivayetbesstupenchaty adjustment, reached by use of the asynchronous engine with frequency regulation.

The lubrication system provides continuous supply of greasing to all bearings and the rubbing connections.

The valve of an otduvka serves for an instant otduvka of a kek.

The control panel allows to operate and control operation of the filter.

 574658685.JPG

Designation

Overall dimensions, mm

 

Н

В

DFМ-63-1У(К)

7250

3850

3360

DFМ-100-1У(К)

8300

               TECHNICAL CHARACTERISTICS

Name of parameter

ДФМ-63  ДФМ-100

Productivity on a deposit, t / м2ч

0.8...1.6

Humidity of a deposit, %

8.6...9.7

Surface of filtering, м2

63

100

Diameter of disks, м

2,58

Quantity of disks, piece.

8      |    12

Quantity of sectors in a disk, piece.

• 12

Vacuum, bar

0,85

Pressure of an otduvka, bar

0,60

Number of turns of a disk shaft, rpm

0,2..2,0

Number of turns of a mixer, rpm

71

Power of the electric motor of the drive of a disk shaft, kW

5,5   .,

7,5

Power of the electric motor of the drive of a mixer, kW

7,5 ."

11

Mass of the filter, kg no more

10400

12500

Symbols:

Д - the disk; Ф - filter;

M - modernized;

63, 100 - the area of a filtration, sq.m;

1 - number of model;

At - execution from carbonaceous steel; To - execution from korrozionnoyetoyky.

Increase of efficiency of a filtration is reached at the expense of the big "live" section of sector - 70%.

The DFM disk filters have more ample technological capabilities, can be adjusted both on increase of productivity of a filtration, and on reduction of humidity of a concentrate. Thus reduction of energy consumption by dehydration anyway is result.

Our company is the developer and the producer of the modern highly effective filtering equipment. We have own design and production resources. A program complex of solid-state modeling with use of SAPR of the top level of Unigraphics Solution and ANSYS, the modern engineering and graphic car projects, working documentation, technological and strength calculations with quality result in total allow to develop. The production base is equipped by all necessary metalworking, welding, assembly and loading разгручным the equipment. In close cooperation with JSC Engineering-filtr (the Moscow Niikhimmash) we carry out research and developmental development in the field of technologies and materials for a filtration of suspensions and dehydration of pulps and slimes.

 

For calculation of cost of this production it is necessary to fill in the Questionnaire for the order of the vacuum filter and to send it to E-mail: office@upmt.com


TO ORDER THE EQUIPMENT


Яндекс.Метрика